Table of Contents
Advertisement
Air Pump Diaphragm Replacement Instructions
1.
Undo screws and remove the upper section of the pump from the bottom section
(see figure 1 below).
2.
Undo screws on valve unit. Lay the screws aside separately from the other screws. Tilt valve unit
to the side (see figure 2 below).
3.
Remove screw including washer from the mounting post. Remove support including cover patch.
Remove diaphragm socket. Insert new diaphragm(s). Reassemble the unit in the reverse order
(see figure 3 below).
1.
Never operate the unit with defective diaphragms. Always replace the complete pair even if
one diaphragm is defective. Failure to follow these instructions can result in electric shock,
serious injuries, or even death. Please contact a qualified technician if you did not wish to
undertake the replacement yourself.
Please note a temperature above 104°F can cause the diaphragm in your pump to fail.
OX-Gen Aeration
2.
3.
Pg. 1 1
Advertisement
Table of Contents
