Listening and Recording FM Radio
Changing the FM Radio Settings
To change the FM radio settings, select
then select [FM Radio Settings].
Setting the reception
When you select stations using the [Auto Preset] function ( p. 68) or the
/ button, the FM receiver may receive unwanted broadcast stations as a
result of sensitivity being too high. In this case, set the reception to [Low].
[High] is set by default.
From the [Home] menu, select
[Scan Sensitivity]
To set the reception sensitivity back to the default, select [High].
Setting monaural/stereo
If noise occurs during FM reception, set the receiver to [Mono] for monaural.
If you set it to [Auto], monaural/stereo reception is selected automatically,
depending on reception conditions. [Auto] is set by default.
From the [Home] menu, select
[Mono/Auto]
To return to the automatic setting, select [Auto].
BACK/HOME
button
5-way button
[Scan Sensitivity]
[Low].
[Mono/Auto]
[Mono].
[Settings] from the [Home] menu,
[Settings]
[FM Radio Settings]
[Settings]
[FM Radio Settings]
[Settings]