Philips Sonicare 3000 Series Manual page 15

Charging
Battery Status
Battery status
Full
Charging
Battery status
Full
Medium
3 Remove the nozzle from the handle by pushing the
nozzle release button on the top of the handle
4 Rinse the nozzle under the tap
5 Dry any excess water from the nozzle, the outside
of the handle, and the reservoir
6 Insert the nozzle back into the handle or utilize the
in-reservoir nozzle storage feature (see 'Storage').
Note: To facilitate drying, keep the reservoir side fill
port door open or leave the Cordless Power Flosser
disassembled between uses.
This Cordless Power Flosser is designed to provide at
least 25 flossing sessions, each session lasting 1
minute.
The battery indicator shows the battery status when
you complete the 1 minute flossing session, or when
you pause the Power Flosser.
When the Power Flosser is charging
Note: The battery indicator will flash until fully
charged. When it becomes fully charged while
plugged in, the light will turn solid green for 30
seconds and then it will turn off
When the Power Flosser is not charging
Battery indicator
Solid green
Flashing green
Battery indicator
Solid green
Flashing green
15
English