Getting Started - Philips Sonicare 3000 Series Manual

Intensities
×3
×2
×1

Getting Started

Charging your Cordless Power Flosser
2
1
Your Cordless Power Flosser comes with three
different intensity settings. To change the intensity to
the setting you prefer, press the intensity button.
Note: It is recommended to start using this Power
Flosser on the lowest intensity and increase the
intensity over the course of a few weeks.
Gently pull and rotate the charging port cover on
1
the back of the Cordless Power Flosser to expose
the charging port .
2 Plug the USB-C charging cable into the USB-C
charging port on the back of the Cordless Power
Flosser.
Note: Make sure the handle is completely dry
before you connect the USB-C cable.
3 Connect the USB cable into a 5V USB wall adapter.
Note: Wall adapter not included in all models. Only
use a 5V IPX4 adapter.
4 The battery indicator flashes while charging (see
'Charging').
Note: It can take up to 8 hours to fully charge the
battery, but you can use the Cordless Power Flosser
before it is fully charged.
Note: Replace the charging port cover on the Cordless
Power Flosser when not actively charging.
11
English