Hyundai HX145 LCR Service Manual page 17

BEWARE OF EXHAUST FUMES BEWARE OF EXHAUST FUMES
Prevent asphyxiation. Engine exhaust fumes
can cause sickness or death.
If you must operate in a building, be positive
there is adequate ventilation. Either use an
exhaust pipe extension to remove the exhaust
fumes or open doors and windows to bring
enough outside air into the area.
REMOVE PAINT BEFORE WELDING OR REMOVE PAINT BEFORE WELDING OR
HEATING HEATING
Avoid potentially toxic fumes and dust.
Hazardous fumes can be generated when paint
is heated by welding, soldering, or using a torch.
Do all work outside or in a well ventilated area.
Dispose of paint and solvent properly.
Remove paint before welding or heating:
· If you sand or grind paint, avoid breathing the
dust.
Wear an approved respirator.
·If you use solvent or paint stripper, remove
stripper with soap and water before welding.
Remove solvent or paint stripper containers
and other flammable material from area.
Allow fumes to disperse at least 15 minutes
before welding or heating.
ILLUMINATE WORK AREA SAFELY ILLUMINATE WORK AREA SAFELY
Illuminate your work area adequately but safely.
Use a portable safety light for working inside or
under the machine. Make sure the bulb is
enclosed by a wire cage. The hot filament of
an accidentally broken bulb can ignite spilled
fuel or oil.
1-5
13031GE14
13031GE15