Raising Boom Without Battery Voltage (12 Volts) - New Holland LS120 Repair Manual

SECTION 00 - GENERAL INFORMATION
RAISING BOOM WITHOUT BATTERY
VOLTAGE (12 VOLTS)
1 . Remove any attachment from the boom
mounting plate.
2. Block the rear of the skid steer under the rear of
lower main frame, 1, as shown.
This will prevent the front wheels from raising
during boom lifting.
3. Attach a fork lift or overhead hoist to the main
boom, 1 and lifting device, 2.
Attach chain or strap securely to prevent
unhooking during boom lifting. Position the chain
or strap at 1 to prevent damage to the boom
cylinder hydraulic hoses and tubes.
A
CAUTION
A
Attach suitable chains or straps capable of
handling the weight of the boom, 227 kg (500 lbs).
Attach chains securely to prevent them. from
coming loose during lifting of the boom.
4. Remove the rod end (top) pivot pins, 1, from both
cylinders. By remove retaining hardware, 2, from
pivot pin and boom.
00-16
a
ti
□□□□□□□
I
□□□□□□□
I
□□□□□□□
0
□□□ po □
- - --c=:==----
-..-c:c..._..7
- · = = = = - = = . /
1
20001505
10
11
12