New Holland LS120 Repair Manual page 40

SECTION 10 - ENGINE
ONAN GASOLINE ENGINE INFORMATION
This section of the manual provides specific
mechanical and electrical information required by the
dealer service technician to troubleshoot, service,
repair and overhaul the engine.
The illustrations and procedures presented will refer
to right and left sides of the engine. The flywheel end
of the engine is the front end and right and left sides
INTERPRETING THE MODEL AND SPEC NUMBER
TYPICAL NUMBER: P218G-l/11076D
are determined by viewing the engine from the front.
The #1 cylinder is on the left and the #2 cylinder is on
the right.
The model and specification numbers for the engine
are on the unit nameplate located on the top of the
engine. Use these numbers when referring to and/or
servicing the engine.
p
Factory code for general identification of basic engine series.
2 Number of cylinders
18 BHP rating
G
Fuel required {G = gasoline)
I Engine duty cycle
11076
Factory code for designated optional equipment, if any.
D
_ Specification (spec letter) which advances with factory production modifications.
10-9