Table of Contents
Advertisement
3. Attach a fork lift or overhead hoist to the main
boom, 1 and lifting device, 2.
Attach chain or strap securely to prevent
unhooking during boom lifting.
CAUTION
Attach suitable chains or straps capable of
handling the weight of the boom, 454 kg (1000
lbs). Attach chains securely to prevent them from
coming loose during lifting of the boom.
4. With an Operator sitting in the Operator's seat
with the seat belt buckled.
5. Turn the ignition key to the "ON" position. Foot
controls, press the toe of the left foot pedal, boom
control, or hand controls, pivot the left-hand
control lever down, into the boom float position.
6. Slowly raise the boom above the boom lock pins,
1.
7. Operator sitting in seat, engage the boom lock
pins, 1.
8. Lower the boom and rest on the boom lock pins,
1.
9. Return the boom control to the "NEUTRAL"
position.
10. Turn the ignition key to the "OFF" position.
CAUTION
The operator must not leave the operator's seat
until the boom is resting solidly on the boom lock
pins. The boom could drop suddenly if lifting
devices should fail.
RAISING BOOM WITHOUT BATTERY
VOLTAGE (12 VOLTS)
1. Remove any attachment from the boom
mounting plate.
2. Block the rear of the skid steer under the rear of
the final drive cases, 1, as shown.
This will prevent the front wheels from raising
during boom lifting.
SECTION 00 - GENERAL INFORMATION
00-15
10995766
1
10995767
10995765
2
1
1
7
8
9
Hide quick links:
Advertisement
Table of Contents
