Advertisement
Quick Links
8-channel automatic Multiplexer
without cross-talk
•
Automatic level control (ALC) according to
The 8-channel automatic multiplexer from Pantron
is a processor controlled amplifier with an integrated
For each channel, the multiplexer has one transistor
pressing a button, is used to determine malfunctions
defective, the test function shows the signal quality.
A line display shows the received signal intensity. The
Pantron Automation, Inc. • P.O. Box 6039 • Gastonia, NC 28056 • Phone: 800-211-9468 • Fax: 704-864-0120
(Industrial Module)
more flashes received, the stronger the signal.
If more than 8 channels are required, several 8-
channel automatic multiplexers or 8-channel standard
multiplexers can be synchronized via master-slave
photo-electric multiplexer.
Advertisement
Related Manuals for Pantron IMX-A832I
Summary of Contents for Pantron IMX-A832I
- Page 1 A line display shows the received signal intensity. The Pantron Automation, Inc. • P.O. Box 6039 • Gastonia, NC 28056 • Phone: 800-211-9468 • Fax: 704-864-0120...
- Page 2 Operating basis range CAN Schnittstelle - optional - 5,08 42,7 dimensions in millimeters...
- Page 3 Receiver Transmitter Output 24 VDC yellow yellow yellow yellow 1 2 3 4 5 6 7 8 black black black black black black black black Transistor output Alarm Ground Voltage output Supply Master OUT Slave IN from master following slave devices IR-Receiver IR-Transmitter Transmitter...
- Page 4 (see picture 1). Phoenix contact. Normal Operation Mode Test Operation Mode STATUS MEANING STATUS MEANING 1-8 green Automatic-Function 1-8 green Signal strength 1-8 red Alarm no Transmitter detected 1 red 2 red no Receiver detected 8-CHANNEL INFRARED 1 yellow Low 1 2 yellow Low 2 AUTOMATIC-MULTIPLEXER...
- Page 5 This is the standard mode that is implemented after switching the supply voltage on, as well as after the RESET push-button has been pressed. This mode is used for the physical alignment of the sensor heads and to test the set up and wiring. The multiplexer displays the following information: f) Master OUT Signal strength...
-
Page 6: General Description
DIP 1 DIP 2 DIP 3 Normal Operation Mode Test Operation Mode STATUS MEANING STATUS MEANING 1-8 green Automatic-Function 1-8 green Signal strength 1-8 red Alarm 1 red no Transmitter detected 2 red no Receiver detected 8-CHANNEL INFRARED 1 yellow Low 1 2 yellow Low 2... - Page 7 8-Channel - Automatic IMX-A832I/24VDC V00/00 0001 47/00 Pantron Instruments GmbH - Germany the contact between transmitter and receiver from this channel is interrupted (polluted or misaligned) or displays H1 to H8 (OUTPUT-STATUS) indicate the state of the outputs. H10 to H17 (AUTOMATIC-FUNCTION)
- Page 8 nd setting). The sensor heads will be activated cycling one after the other. The state of the beam is not Normal operating mode hannel 1). The multi function display shows the beam status (see Test mode Test mode Beam status Settings next channel he display H10 to H17 indicates information about the beam quality, resp.