Advertisement
II. Disassembling the SCANNER
• Remove the scanner guide cover.
‚ Remove the cover from the battery compartment, and take out the six batteries. (Skip this step if there
are no batteries in the compartment.)
ƒ Remove the four screws from the bottom of the compartment, lift up the main body of the scanner, and
remove the two connectors.
„ Remove the four screws securing the main PC board assembly and take out the assembly.
... Disconnect the scanner connector from the main PC board assembly.
† Remove the cord guide from the main body of the scanner, and disconnect the scanner connector from
the main body.
‡ Remove the four screws that secure the LCD module to the main body of the scanner, and take off the
LCD module.
ˆ Remove the four screws that secure the battery holder to the main body, and take off the battery holder.
Fig. 1 Connecting the LCD module leads to the main PC board assembly
Fig. 2 Arranging the cables for the Scanner B5N-1771
www.promelectroavtomat.ru
- 5 -
Advertisement
