Advertisement
Quick Links
www.costway.com
USER'S MANUAL
FOLDING WALKER
SP37508
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Costway
Please give us a chance to make it right and do better！
Visit us: www.costway.com
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Costway SP37508
Summary of Contents for Costway SP37508
- Page 1 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Follow Costway Please give us a chance to make it right and do better！ Visit us: www.costway.com Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP!
-
Page 2: Before You Start
Contact Us! Do NOT return this item. Contact our friendly customer service department for help first. E-mail US: cs.us@costway.com UK: cs.uk@costway.com Before You Start Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. - Page 3 Please read the manual carefully before assembling and keep it for future reference. Product introduction: The support arm type walker frame tube is made of aluminum alloy, the black H frame and the grip tube are made of iron, the seat plate is PVC leather, the front wheel is 4 inches, the rear wheel is 5 inches with brakes, and it is equipped with hanging Bag.
- Page 4 Preparation Before Assembly: After unpacking the packaging box, first remove the protective bag and foam of the packaging. Please take care to protect all the parts in the box. If assembling on the ground, put paper or carpet on the ground first.
- Page 5 FIG. 1 FIG. 2 FIG. 3 Step 4: Insert the 2 armrest support components into the oval tube of the frame, and press and hold the marble to adjust the height to suit you. (Pay attention to distinguish the front and back direction)(As shown in FIG.
- Page 6 Step 7: Fasten the brake cable with the plastic buckle on the frame. (As shown in FIG. 7) Step 8: Clamp the plastic buckles at the front ends of the seat plate on the support tube of the frame, and then lock it with a Torx knob and Torx screws.
- Page 7 Component Description: The brake operation instructions are shown in the following figure: A1: Normal use state without braking state A2: Brake as needed during use A3: Press down the brake handle to continue braking state A3: Rotating nut can adjust the brake Tightness A4: Rotating nut can adjust the brake Tightness.
- Page 8 Welcome to visit our website and purchase our quality products! With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE! US office: Fontana, California UK office: Ipswich Reward Points...
Need help?
Do you have a question about the SP37508 and is the answer not in the manual?
Questions and answers
I believe the part that does not work is called the folding swit. Can I replace that?
the pressure button no longer aligns when the holes in the tubes, therefore i cannot stabilize the walker. Is there a part to fix this?