Using The Vacuum; After Use; Maintenance And Cleaning - Sharper Image 207855 User Manual

USING THE VACUUM

• Once completed, turn the unit again and switch on the vacuum function with the vacuum
switch (9) by pressing it once as shown in Figure 4. Keep the device in horizontal position and
move the squeegee (2) over the surface in a gentle, top-to-bottom movement to vacuum and
remove and remove the excess water and dirt.
FIGURE 3
Warning: Do not spray water into the eyes of people or animals. Do not spray water onto
electronics such as computers or television sets.
Warning: This device is for cleaning windows. Do not use the vacuum function for cleaning
up household spills or messes.

AFTER USE

• Turn off the vacuum function by pressing the Vacuum switch (9)
• Wait 30 seconds to lift the water tank cap, remove the filter and empty the water tank (4) by
turning the device upside down above the sink.
• Wash the filter carefully before placing it back in the unit. The collected water from the
vacuum cleaner is recycled through this filter and it is therefore important it is cleaned after
each use.

MAINTENANCE AND CLEANING

• Note: Always switch off the device and unplug from the charger before cleaning. Never
immerse the device and/or the power cord in water or other liquids.
• Turn the device off.
• Lift the water tank cap, remove the filter and empty the water tank by turning the device
upside down above the sink.
• Clean the device and accessories with a damp cloth and a mild detergent and allow it to dry
completely.
• Wash the filter carefully before placing it back in the unit. The collected water from the
vacuum cleaner is recycled though this filter and it is therefore important it is cleaned after
each use.
• Note: Never use abrasives, bleaching agents or steel wool to clean the device. This could
cause damage to the material.
FIGURE 4
- 4 -