Advertisement
FILLING THE WATER TANK
• Switch the device OFF and disconnect it from the charger.
• Pull out the water tank and remove the cap.
• Fill the water tank (6) with clean water by slightly tilting the device forward. Once the water
tank is nearly full, replace the water tank cap. Note: Do not add harsh cleaning materials. Only
use clear and pure water. The use of distilled water is recommended in areas with hard water
to avoid lime scale deposits.
Note: Be sure to unplug the device while refilling the tank.
ATTACHING THE CLEANING WIPES
• The cleaning wipes stick to wipe attachment area (1) with Velcro. Position the selected wipe in
front of the attachment area evenly, then press the surface to secure it, as shown in Figure 1.
• Remove the wipe by simply tearing it off. See Figure 2.
• Emery wipes can be used to remove tough stains and grease from your surfaces while the
microfiber wipes give a shiny and streak-less finishing for less dirty surfaces.
• For best results, wipes should be replaced regularly according to their cleanliness. Wipes can
be machine washed at 100°F. Do not put wipes in the dryer.
FIGURE 1
SPRAY TRIGGER
• Hold the unit by the handle and press the water spray trigger (5) as shown in Figure 3.
CLEANING WINDOWS
• Turn the device and wash the surface with either one of the wipes attached to the unit. If
necessary, a mild glass cleaner can be sprayed on the window to help remove dirt and grime.
FIGURE 2
- 3 -
Advertisement
