Advertisement
INTRODUCTION
The Cordless Window Vacuum gives your windows a brilliant, streak free cleaning every time.
Just spray, wipe and vacuum away the dirty water. Its double tank system stores clean and dirty
water separately.
FEATURES
• Battery: 3.7V ~1500 mAh Li-lon
• Clean water tank: 65ml
• Dirty water tank: 85ml
• Working time: 30min
• Charging time: 2h
• Output: 5V 1000mA
• Input: 100-240V~50/60Hz
IDENTIFICATION OF PARTS
1. Wipe Attachment Area
2. Squeegee
3. Spray
4. Water collection tank
5. Trigger
6. Clean water tank
7. Air outlet
8. Squeegee press-button
9. Switch
10. Handle
11. Battery level LED lights
12. Charger socket
IMPORTANT! Before Using the Cordless Window Vacuum, please insert the suction strainer as
shown below [FIG. 1-3]
CHARGING THE BATTERY
• Connect the charger to the device at charger socket (12). Then, plug the charger into an AC
outlet.
• A BLUE light (11) will turn on to indicate the device is charging. Four LED lights turn on when
the battery is fully charged.
• It takes approximately 2 hours to fully charge the battery.
• Note: we recommend that you unplug your charger when charging is complete and the GREEN
light illuminates.
- 2 -
Advertisement
