LDA Audio Tech NEO Series Support Handbook
Emergency power supply installation
Hide thumbs
Also See for NEO Series:
- Support handbook (2 pages) ,
- Support handbook (3 pages) ,
- Support handbook (9 pages)
Subscribe to Our Youtube Channel
Related Manuals for LDA Audio Tech NEO Series
Summary of Contents for LDA Audio Tech NEO Series
- Page 1 Support Handbook Emergency power supply installation on NEO series devices EVAC CH-1 CH-2 ALERT CH-3 CH-4 EMG SRC CH-5 CH-6 EMIC CH-7 CH-8 PROT LINK POWER FAULT Ref: D-008024-EN-r03...
- Page 2 NC input. The NEO series devices read the fault signal when the contact closure on the NC input is opened. Note that this logic is opposite to that used by the chargers supplied by LDA, so the wiring should be connected as shown in diagram 3.
- Page 3 Emergency power supply installation on NEO series Support Handbook - Error: No se encuentra la fuente de referencia 7. Turn on the general power supply of the battery charger. 8. Make sure the installation is wired as shown in diagram 1 below.
- Page 4 Emergency power supply installation on NEO series devices Support Handbook - Error: No se encuentra la fuente de referencia Diagram 3: NEO and battery charger connection detailed 5 SUPERVISION Once power supply is connected to NEO unit, power supply monitoring must be engage through system configuration.
- Page 5 1º) 1º) 2º) 2º) 3º) 3º) Image 1: Activete power monitoring, charger and emergency power supply ANNEX I: SAFETY NOTICE Please read this handbook carefully to safely connect the batteries and the battery charger to the PA/VA system. Under the electrical safety regulations EN 62368, these components may only be handled by skilled personnel ( it is considered) as category ES3.
- Page 6 For more information, please, contact with our Support Department at: support@lda-audiotech.com...
Need help?
Do you have a question about the NEO Series and is the answer not in the manual?
Questions and answers