Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Owon PIR313
Summary of Contents for Owon PIR313
- Page 1 PIR313 PIR Multi-Sensor Quick Start Guide...
- Page 2 Introduction The PIR313 Multi-sensor is used to detect movement, temperature & humidity, illuminance in your property. It allows you to receive notification from the mobile app when any movement is detected. You may also use the multisensor to monitor temperature & humidity, as well as illuminance.
- Page 3 LED indicator The LED status gives the following information: LED status What it means Red LED flashing Device has not joined a network or is three times ready to join a ZigBee network Green LED flashing Joined a ZigBee network three times Red LED flashes once Motion detected...
- Page 4 Dip switch Status Dip switch Disable notifications when Enable notifications when device is tampered. device is tampered. Alarm will be shown in the Alarm will be shown in the mobile app for 1 minutes. mobile app for 30 seconds. Reserved. Reserved.
- Page 5 3.3 Connect to the gateway’s network 1. Set your gateway to permit joining. 2. Press the reset button once and the LED indicator will flash red for three times quickly indicating the sensor is ready to join the gateway (reset the Multi-sensor if not).
- Page 6 Mount example 2.1m Avoid mounting...
- Page 7 Technical Specifications Wireless connectivity • ZigBee 2.4GHz IEEE 802.15.4 ZigBee profile • Home Automation Profile Range outdoor/indoor • 100m/30m Operating Voltage • DC 3V (2*AA battery) • Standby Current: ≤40μA Current • Alarm Current: ≤110mA Temperature Measurement • Range: -10~85° C Humidity Measurement •...
- Page 8 Notice Safety WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the multi sensor and other property. Read all the safety notices below before using the multi-sensor. • Avoid high humidity or extreme temperatures. •...
Need help?
Do you have a question about the PIR313 and is the answer not in the manual?
Questions and answers