Page 1
SPD 3100 Pet Water Fountain Quick Start Guide...
Page 2
Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock or other injuries. Read all the safety notices below before use. • Avoid high humidity or extreme temperatures. • Avoid long exposure to direct sunlight or strong ultraviolet light. • Do not drop or expose the unit to intense vibration.
Page 3
Technical Specifications Hopper Capacity • 1.4 L • DC 5V 1A Power • USB Material • ABS Plastic Dimension • 163x164x160 mm N. W. • 0.5KG...
Page 4
In the Box • Pet Water Fountain x 1 • Filter Cotton x 1 • USB cable x 1 • Quick Guide x 1 Please check the condition and the accessories of the water fountain after you open the box.
Page 5
Get to know your device Flower Head Cover Filter Top Cover Pipe Pump Water Tank LED indicator Light Status Blue light is always on Normal Red light flashes Water shortage alarm Red light is always on Stopped...
Page 6
Get Started 1. Fix one end of pipe on the 2.Fix the other end of the pipe to pump. the lower end of the top cover. 3.Route the USB cable through 4. Ensure the water level between the built-in cable hole in the the minimum water level and the bucket.
Page 7
5. Fix the top cover on the water 6.Place the filter in the slot in tank. the top cover(Wet the filter before using it) 7. Tighten the cover in the clockwise 8.Install the flower and switch direction on the power supply.
Need help?
Do you have a question about the SPD 3100 and is the answer not in the manual?
Questions and answers