Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Owon SPF 2200-WB-TY
Summary of Contents for Owon SPF 2200-WB-TY
- Page 1 SPF 2200-WB-TY Smart Pet Feeder Quick Start Guide...
- Page 3 Preface Quick start by the following steps: Please scan the QR code on the packaging box or search 'Smartlife' • from APP store to download the APP. Make sure the device's Wi-Fi indicator is rapidly blinking. If not, please • reset it.
-
Page 4: Safety Notice
Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Smart Pet Feeder and other property. Read all the safety notices below before using the Smart Pet Feeder. • Avoid high humidity or extreme temperatures. • Avoid long exposure to direct sunlight or strong ultraviolet light. -
Page 5: Technical Specifications
Technical Specifications Hopper Capacity • 5 L Auto Feeding Time • 1-10 meals per day • DC power cord • Backup batteries: 3 X D cell Power batteries (or 1 X 18650 type Li- ion battery) Buletooth • 4.2 Low energy Dimension • 383 x 221 x 338 mm N. - Page 6 Welcome The Smart Pet Feeder allows you to feed your pet remotely or apply schedules for automatic feeding. You can get the feeding information anywhere at any time. This guide will provide you with an overview of the product and help you get through the initial setup.
- Page 7 In the box • Pet Feeder x 1 • Power Adapter x 1 • Quick Guide x 1 NOTE：18650 battery box needs to be purchased separately. Please check the condition and the accessories of pet feeder after you open the box. APP Download: 1.
-
Page 8: Get To Know Your Device
Get to know your device Cover Button & indicator Food outlet Bowl... -
Page 9: Power Switch
Loudspeaker Power switch Power jack Battery box Battery box 3 x D cell batteries ( or 1 x 18650 batteries ). Please pay attention to the polarity. Please note that the battery charging is for backup purpose only. If you wish to control the pet feeder remotely, power supply is needed. - Page 10 WiFi Button Recording Feeding Button Button Indicator Feeding Button: • Short press to deliver a portion of food • Long press to deliver food continuously Indicator The Wi-Fi status gives the following information: Wi-Fi Status What it means Blue light flashes rapidly EZ pair mode. Blue light flashes slowly AP pair mode.
-
Page 11: Recording Button
Recording Button: • Long press the recording button to record. When the device indicator is green, the device is recording. Note: Press and hold the button for 2 seconds to enter recording mode (the green light will be always on), and the recording ends when the hand is released. -
Page 12: Get Started
Get started To get started, you will need: • Connect your phone to the 2.4Ghz Wi-Fi network. • A mobile phone with a mobile APP installed. Then follow the steps below: 1. Power on the Smart Pet Feeder. 2. Make sure the Wi-Fi indicator is rapidly blinking. If not, please reset 4.1 Add devices 1. - Page 13 5. Enter your home Wi-Fi account and password (Only support 2.4Ghz Wi-Fi), then tap "Next" button. Other Device Adding Mode 1.Configure the network in EZ mode. Note: In this case, if you only need to configure one device, no need to turn on your phone's bluetooth.
- Page 14 1.3 Enter your home Wi-Fi account and password (Only support 2.4Ghz Wi-Fi), then tap "Next" button. 1.4 Place the router, mobile phone, and Pet Feeder as close as possible. Confirm the indicator on your device is rapidly blink, then tap "Next" to wait for connection.
- Page 15 2.4 After the device has been added, you can use to rename the device. (If failed, please refer to FAQ2 to troubleshoot) 6. Wi-Fi configuration of the device failed - Confirm the entered router password is correct. - Ensure that the DHCP service is enabled for the router. If not, the IP address will be occupied.
- Page 16 - Confirm that both the location permission of phone system and the App are enabled. - If you have already upgrate the iOS system to 14, you need to enable the "Local network" and "Bluetooth" of the App. - If it still does not work, it is recommended to change the router and try again.
- Page 17 8. Place the router, mobile phone, and pet feeder as close as possible. Confirm the indicator on your device is rapidly blink, then tap "Next" to wait for connection. 9. After the device has been added, you can use to rename the device.
-
Page 18: App Overview
4.2 App Overview: Home management Add Device Voice Control Location information Home Management Device List Home: 1.Home management Add or delete home and manage home names, rooms, locations, and members. 2.Location information Information about your local weather, conditions, outdoor temperature,PM. 3.Device list You can check the added device, tap one to enter control boar. -
Page 19: Control Board
More settings Power display Feeder status Device settings display Pet's picture settings Add schedule for automatic feed Feed records Manual feeding portion setting Maunal feeding 1.Control board: Select the target Pet Feeder in device list then enter the control board •Meal plan Tap to edit the schedule for the automatic feed. - Page 20 • Manual feeding & Feeding portion setting Tap "-" to reduce feeding portion and tap "+" to add feeding portion when manual feeding. The maximum number of portion is 12 at a time. • Feeder status display It will have three different status: Standby, Feeding and Done. •...
- Page 21 3.Food shortage alarm: When it is short of pet food, the APP will recevie the alarm. And the red light will flash rapidly. 4.Feeding plan display: The next feeding time and the number of portions will be shown.
- Page 22 5. FAQ: How to install the 18650 battery: Note: Both the battery and the battery box of 18650 need to be purchased separately 1. Get a battery box with 18650 battery, like figure 1. 2. Place the feeder horizontally in front of the body, then put the battery box into the battery slot according to the direction shown in the figure 2, and then push it forward to fix it.
Need help?
Do you have a question about the SPF 2200-WB-TY and is the answer not in the manual?
Questions and answers