Waving The Equalizer; Using The Drum Pads - Sony MHC-GR8 Operating Instructions Manual

Waving the equalizer

— Wave
With the Wave function, you can fluctuate the
graphic equalizer automatically. This effect
can be used with any source, but it cannot be
recorded.
jog dial
WAVE
POWER
0 )
/
Press and hold WAVE to start the
Wave function, and release to
resume normal listening.
To adjust the wave length
Turn the jog dial while holding WAVE to
select a different wave length (WAVE 1~10).

Using the drum pads

With the drum pads, you can add percussion
during playback. This effect can be used with
any source, to create original recordings.
POWER
„
Æ‚
⁄
/
Tap drum pad A or B to produce the
respective sound.
To change the drum sound
Press and hold down pad A or B and turn the
jog dial to select the sound you desire. You
can select from 21 different drum sounds. The
name of the drum sound appears in the
display.
KICK˜ SNARE˜ . . . ˜SCRATCH PUSH
The sound you select will be stored in pad A
or B.
To create a drum roll
Turn the jog dial while holding down
CHAIN. You can vary the speed of the drums
by turning the jog dial counterclockwise (for
pad A) or clockwise (for pad B).
To adjust the volume of the pads
Press LEVEL + or –.
Note
When the APPLAUSE MIX function is selected, you
will not hear the drum pad during the applause.
PAD A/
jog dial
PAD B
0 ) „
⁄
CHAIN
LEVEL +/–
Æ‚
27