Electric pedestal/wall radiant heater for industrial use only (13 pages)
Summary of Contents for Fanmaster HES2.4
Page 1
FA NM A ST E R cooling heating ventilation extraction INSTRUCTION MANUAL ELECTRIC SPACE HEATER MODEL: HES2.4 FOR INDUSTRIAL USE ONLY TO PREVENT SERIOUS INJURY, READ & UNDERSTAND ALL WARNINGS & INSTRUCTIONS BEFORE USE. PLEASE KEEP THIS DOCUMENT FOR YOUR RECORDS...
FOR YOUR INFORMATION Thank you for purchasing a Fanmaster electric space heater. Please read this instruction manual carefully before using this heater. Disclaimer: Fanmaster reserves the right to make alterations to specifications, quantities, dimensions, for production or other reasons, subsequent to publication.
Page 3
ALWAYS CHECK THE POWER CABLE BEFORE USING THE APPLIANCE. IT MUST NOT BE BENT, TAUT, STRETCHED, CRUSHED OR ANY WAY DAMAGED. • IF THE POWER CORD AND/OR PLUG IS DAMAGED, IT MUST BE REPLACED BY FANMASTER, A SERVICE AGENT OR A QUALIFIED PERSONS. •...
2. PRODUCT DESCRIPTION & SPECIFICATIONS PRODUCT DESCRIPTION Industrial electric space/fan heater. SPECIFICATIONS MODEL HES2.4 2400 W Heat Output 6,824 BTU Air Flow (L/s) 1 x Fan setting Control settings 2 x Heat settings Settings (W) 30/1200/2400 Voltage (V/Hz) 240V/50 Self-Resetting 70’C...
Page 5
3. ASSEMBLING & OPERATING INSTRUCTIONS Remove the heater from the carton. If the heater is damaged, please contact Fanmaster or where you purchased the heater from. First time use, you may notice a slight emission of smoke. This is quite normal & it will stop after a short time.
4. CLEANING, MAINTENANCE & STORAGE • Before starting any maintenance task, shut down, unplug and let the heater cool down for at least 15 minutes. • Do not attempt any electrical repair yourself. If the heater needs service or repair, contact a qualified persons.
7. TROUBLESHOOTING PROBLEM CAUSE SOLUTION The heater does not operate, even Disconnect the plug, check The plug is loose, bad when it is plugged the connection of the plug & connection in & the siwtch, socket. Try another socket thermostat are ON The input voltage is too high Check power supply or too low...
To make a claim under the warranty, take the product (with proof of purchase) to the store where you purchased the product or go to https://www.fanmaster.com.au/warranty-claims-returns. This warranty is given by Fanmaster Pty Ltd ABN: 45 353 934 457 Unit 1/6-8 Yalgar Rd, KIRRAWEE NSW 2232 P: 1300 900 345 E: warranties@fanmaster.com.au...
Page 12
FA NM A ST E R cooling heating ventilation extraction Fanmaster Pty Ltd | 1/6-8 Yalgar Road, KIRRAWEE NSW 2232 1300 900 345 | sales@fanmaster.com.au | www.fanmaster.com.au N11664 MADE IN CHINA...