Advertisement
5
Hold = The Hold button is used to Pause a program run. Press
the Run button to continue. NOTE: The spindle stays running
during hold. Press stop button to stop the spindle and
program.
Run = The Run button is used to start a CNC Program.
Preview Program = This button will open a visual
representation of the active program in X and Y axis and
provide a estimated run time.
Settings = The settings button enters the Over ride / MDI
screen. This is also accessible from the set-up menu screen
under CNC Settings.
Right side fields defined:
Select Program drop down window = This field allows you to
quickly select a program from the files copied to the controllers
memory.
Active Tool = This references the current tool in spindle.
Feedrate = This shows the current federate as dictated by the
active program.
Spindle RPM = This shows the current spindle speed.
Start at Block = This is the run from line number function. With
the machine in a Stopped state input the line in which you
would like to start from and press the Run button.
Advertisement
