Canon S100SP User Manual page 163

5
When the confirmation message appears, click [OK].
6
Click [Close] to close the [System Properties] window.
In Windows 2000, click
window.
7
Click at the top right of the [Control Panel] window to close it.
8
Unplug the printer.
9
Remove the Setup Software & User's Guide CD-ROM , if it is in the drive.
10
Restart Windows.
11
Install the printer driver again following the instructions in the Quick Start
Guide .
and then click [OK] in the [System Properties]
Deleting an Unknown Device
Appendices
163