Esata Pci Express Card Installation; System Requirements; Hardware Installation - Rocstor ARCTICROC 2T User Manual

eSATA PCI EXPRESS CARD INSTALLATION

Complete the steps provided in this section to install the eSATA PCI Express Card to use with
the RAID System. The eSATA PCI Express Card provides a host computer with two Windows and
Mac compatible eSATA ports.

System Requirements

Windows 2000 with Service Pack 4 or later
Windows XP with Service Pack 2 or later
Windows 2003 with Service Pack 1 or later
Mac OS 10.4.x or later
An available PCI-Express slot
CD-ROM or DVD-ROM drive

Hardware Installation

1. Power "OFF" and unplug your computer.
2. Remove the housing of your computer and locate an available PCI-Express slot on your
motherboard.
3. Insert the card in the available PCI-Express slot. Ensure that the card is firmly seated in
the slot.
4. Replace the housing of your computer.
System
Frame
All manuals and user guides at all-guides.com
Screw
Mounting
Bracket
ARCTICROC 2T – 2Bay RAID System - User Manual
PCI-Express
Card
Page | 29