ETC Echoflex ER6CD Installation Manual page 8

Phase adaptive dimmer
Table of Contents

Advertisement

Echoflex Installation Guide
Phase Adaptive Dimmer
LED Drive Mode
The LED drive mode can be enabled or disabled according to the load.
• Enabled (default) - the minimum dimming level is used. Enable the
setting for use with ELV, LED, MLV track lighting with LED loads, or
2-wire fluorescent.
• Disabled - the minimum dimming value is 0. Disable the setting for
use with halogen or incandescent, and for MLV track lighting with
halogen or incandescent loads.
To Disable LED drive mode:
1. Press and hold both the [Learn] and the [Clear] buttons until both the
Power and Learn LEDs blink blue to access the dimming menu.
2. Press the [Clear] button once to access the drive mode menu. The
Power LED remains ON solid blue and the Learn LED blinks green to
indicate:
• 1 blink = Disabled
• 2 blinks = Enabled (default)
3. Press and release the [Learn] button to cycle through the blink codes
until 1 green blink displays (disabled).
4. Press and hold the [Clear] button until the Learn LED blinks blue to
save and exit the menu.
To Enable LED drive mode and adjust minimum dimming level:
1. Press and hold both the [Learn] and the [Clear] buttons until both the
Power and Learn LEDs blink blue to access the dimming menu.
2. Press the [Clear] button once to access the drive mode menu. The
Power LED remains ON solid blue and the Learn LED blinks green to
indicate:
• 1 blink = Disabled
• 2 blinks = Enabled (default)
3. Press and release the [Learn] button to cycle through the blink codes
until 2 green blinks display (enabled).
4. Press the [Clear] button once to access the levels menu. The Power LED
remains ON solid blue and the Learn LED is ON solid red.
5. Press and release the [Learn] button to increase the minimum
dimming level by 5% increments. The default dimming level is 20%.
The levels wrap around to 0% once 100% is reached.
6. Press and hold the [Clear] button until the Learn LED blinks blue to
save and exit the menu.
The dimming menu times out after 30 seconds of inactivity.
Phase Adaptive Dimmer (ER6CD/ER12CD)
Page 8 of 12
Echoflex

Advertisement

Table of Contents
loading

This manual is also suitable for:

Echoflex er12cd

Table of Contents