Table of Contents
Advertisement
Echoflex Installation Guide
Phase Adaptive Dimmer
Wiring Diagram
White - Neutral
Black - Line, 120 V or
Brown - Line, 277 V
Green/Yellow Ground
Electrical Terminations
Power to the controller is connected between the White (Neutral) and the
Black or Brown Line power (120 or 277 VAC), respectively. The orange wire
is an antenna. Do not cut, cap, or connect this wire. Use only UL-approved
wire when making connections to the controller (see table below).
Connection
Load
Neutral
Line
Controller Interface
The controller has two LEDs and two lever-type buttons located below the
label.
Power LED and Learn LED
The Power and Learn LEDs can display green, blue, or red. LED color and
combinations indicate whether the controller is providing information via
blink codes or is in an operational mode. See
page
on
Phase Adaptive Dimmer (ER6CD/ER12CD)
ER12CD-AU
1200 W Dimmer
Red
White
Black or Brown
6.
Neutral - To other fixtures
Dimmable
Lighting
Fixture
To other 120 V or 277 V fixtures
Color
Blink Codes and Operations
Page 4 of 12
Specification
14 AWG, 600 V
14 AWG, 600 V
14 AWG, 600 V
Echoflex
Advertisement
Table of Contents
