Page 1
1. Product Name Visual Contrast & Sound Sensory Mat 2. Product Code 20433 3. Colour Black and white with some multi‐coloured areas (Interactive shapes may vary in size, shape and colour) 4. Brief Description 12 mat set with tactile surfaces to explore. Includes two re‐recordable (10 second) devices to be used separately from the mat by superviser/therapist. Portable ‐ includes storage and carry bag. 5. Contents • 8 x square mats 4 x triangular mats • 1 x central sheet • 1 x pack of Velcro (Approximately 2m70cm length and 10cm wide) • 2 x re‐recordable sound devices (to be used separately, not for insertion into the mat) • Bag • ...
Page 2
Tactile • 7. Best Use • Use on a flat surface. • Use under supervision at all times. • Risk assess area in which it is to be used. • Remove footwear before using the product. 8. Compatible ROMPA® Products This can be used with Playring™ (product code 14404) to be purchased separately. 9. Starting Up • Position the mats as required (as a path or a ring) 10. Detailed Description 12 mat set with sound and tactile surfaces to explore. Portable ‐ includes storage and ...
Page 3
12. Technical Specification • Size: squares 40 x 40cm • Weight: approximately 5kg • Fabric: non‐toxic, phthalate‐free, formamide free, fomaldahyde free, anti‐bacterial protection that fights fungus and bacterial growth and fire‐retardant. • Foam: fire‐retardant, CFC free. • Seams are shower resistant for temporary use outside (but not 100% waterproof) • Hammer tough safety mirror compliant to EN71 13. Installation 1. Place on a flat, stable indoor floor, away from obstacles. If the product is taken outside on a warm day, place on a dry, non‐abrasive, clean surface and bring indoors after use. 2. Join the mats together in the desired combination – it’s up to you how you arrange them e.g. in a circle or as a path. 3. Cut the “soft” Velcro strip into sections and attach to the “hooky” Velcro located on the underside of the mats and join together It is easier to use the set if you make short joins rather than trying to attach strips fully down the 40cm cushion length. 4. There are 19 joins to make: (11x pad to pad and 8x pad to centre). Cutting approximately 15cm lengths of Velcro per join is suggested by the manufacturer. 5. Record a 10 second message, sound or tune snippet on each of the devices. 6. To record: hold down the two yellow buttons and the red light will come on to show that recording has started. 7. These are re‐recordable – change the message as required. Release the yellow buttons at the end of the recording. 8.
Page 4
VISUAL CONTRAST & SOUND SENSORY MAT 20433, October 2013 Copyright ROMPA®Ltd...
Need help?
Do you have a question about the 20433 and is the answer not in the manual?
Questions and answers