Related Manuals for Itm ALNOR AVM410
Summary of Contents for Itm ALNOR AVM410
- Page 1 AIR VELOCITY METER ALNOR MODEL AVM410 ® AIRFLOW INSTRUMENTS ™ MODEL TA410 OPERATION AND SERVICE MANUAL P/N 1980575, REV G NOVEMBER 2020 1.800.561.8187 information@itm.com www. .com...
- Page 2 1.800.561.8187 information@itm.com www. .com...
- Page 3 INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING CLAIMS BASED ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) SHALL BE THE RETURN OF GOODS TO SELLER AND THE REFUND OF THE PURCHASE PRICE, OR, AT THE OPTION OF SELLER, THE REPAIR OR 1.800.561.8187 information@itm.com www. .com...
- Page 4 If any malfunction is discovered, please contact your nearest sales office or Trademarks TSI, the TSI logo, Alnor, and Airflow Instruments are registered trademarks and trademarks of TSI Incorporated in the United States and may be protected under other country’s trademark registrations. 1.800.561.8187 information@itm.com www. .com...
-
Page 5: Table Of Contents
Retracting The Probe ..............3 CHAPTER 3 OPERATION ..............5 Keypad Functions ................5 CHAPTER 4 MAINTENANCE ............7 Recalibration ................... 7 Cases ....................7 Storage ................... 7 CHAPTER 5 TROUBLESHOOTING ..........9 APPENDIX A SPECIFICATIONS ............. 11 1.800.561.8187 information@itm.com www. .com... -
Page 6: Chapter 1 Unpacking And Parts Identification
Unpacking and Parts Identification Carefully unpack the instrument and accessories from the shipping container. Check the individual parts against the list of components below. If anything is missing or damaged, notify ® Incorporated immediately. 1. Carrying case 2. Instrument 1.800.561.8187 information@itm.com www. .com... -
Page 7: Chapter 2 Setting-Up
DO NOT hold the cable while extending the probe as this prevents the probe from extending. Retracting the Probe To retract the probe, hold the handle in one hand while pulling gently on the probe cable with the other hand. 1.800.561.8187 information@itm.com www. .com... -
Page 8: Chapter 3 Operation
To change units, first put the desired measurement (air velocity or temperature) on the display. Then press and hold the left, unlabelled key for five seconds. Finally, use the and ENTER key to select the units. 1.800.561.8187 information@itm.com www. .com... -
Page 9: Chapter 4 Maintenance
AVM410/Airflow™ Instruments TA410 becomes broken, it must be replaced immediately to prevent access to hazardous voltage. Storage Remove the batteries when storing the unit for more than one month to prevent damage due to battery leakage. 1.800.561.8187 information@itm.com www. .com... -
Page 10: Chapter 5 Troubleshooting
W A R N I N G ! Remove the probe from excessive temperature immediately: excessive heat can damage the sensor. Operating temperature limits can be found in Appendix A, Specifications. 1.800.561.8187 information@itm.com www. .com... -
Page 11: Appendix A Specifications
The accuracy statement of ±5.0% of reading or ±5 ft/min (±0.025 m/s), whichever is greater, begins at 30 ft/min through 4000 ft/min (0.15 m/s through 20 m/s). Accuracy with instrument case at 77°F (25°C), add uncertainty of 0.05°F/°F (0.03°C/°C) for change in instrument temperature. 1.800.561.8187 information@itm.com www. .com...
Need help?
Do you have a question about the ALNOR AVM410 and is the answer not in the manual?
Questions and answers