1. Manuals
  2. Brands
  3. Itm Manuals
  4. Measuring Instruments
  5. Megger MPQ1000
  6. User manual

Itm Megger MPQ1000 User Manual

Pq analyzer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MPQ1000-UG-EN
Rev 6
April 2020
User Manual
Megger MPQ1000
PQ Analyzer
1.800.561.8187
information@itm.com
www.
.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Megger MPQ1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Itm Megger MPQ1000

Summary of Contents for Itm Megger MPQ1000

  • Page 1 MPQ1000-UG-EN Rev 6 April 2020 User Manual Megger MPQ1000 PQ Analyzer 1.800.561.8187 information@itm.com www. .com...
  • Page 2 Products supplied by Megger are warranted against defects in material and workmanship for a period of two years following shipment no other warranty. The warranty is void in the event of abuse (failure to follow recommended operating procedures) or failure by the customer to perform specific maintenance as indicated in this manual. 1.800.561.8187 information@itm.com www. .com...

  • Page 3: Table Of Contents

    Uploading a Setup File from the USB stick ........................ 35   Uploading a Setup File from the SD Card ........................37   Activating the Imported Setup File ..........................38   Renaming a Data or Setup File ............................. 39   MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 4 Viewing a Flicker Chart ..............................78   Viewing an Event Chart ..............................80   12 Unit Maintenance ................................83   Battery Replacement ............................... 83   HELP Screen ................................... 86   13 Spare Parts ..................................87   MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 5: Introduction

    Introduction Thank you for your purchase of the Megger MPQ1000 PQ Power Analyzer. Be assured that your unit has been designed with emphasis on reliability, simplicity and ease of use. It will provide you with the information you need to investigate customer power quality complaints and compliance situations, verify billing, and pinpoint locations of high demand and power consumption.

  • Page 6: Receiving Information

    Current Clamps sold separately When your Megger MPQ1000 Kit arrives, check the equipment received against the packaging list to ensure that all materials are present. Notify Megger of any shortages. Examine the contents for damage received during transit. If any damage is discovered, file a claim with the carrier at once and notify Megger or it’s nearest authorized sales...

  • Page 7: Overview Of Mpq1000

    This is accomplished by creating a setup on a computer using Power Quality Software and uploading it to the Megger MPQ1000 Power Quality Analyzer. Each unit can store up to 90 user-defined setups. Should you need to change setups on site, you may select any of your programmed setups using the Power Analyzer’s front panel...

  • Page 8: Applications

     Class A Compliance Testing  EN50160 Testing  Harmonic Studies  Rapid Voltage Change Analysis  Flicker Analysis  Imbalance Surveys  Reliability Studies  Troubleshooting  DC System Testing MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 9: Definitions

    A user selectable value in the setup file that defines the number of cycles the unit will record after a cycle has occurred that has exceeded the user programmed event limits. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 10 The ratio of the root-mean-square of the harmonic content to the root-mean- square value of the fundamental quantity, expressed as a percent of the fundamental. Transient A sudden non-power frequency change in the steady state condition of voltage or current. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 11: Calculations

    Usr(n) = 0.9967 x Usr(n–1) + 0.0033 x U(10/12)rms Where: is the present value of the sliding reference voltage; Usr(n) is the previous value of the sliding reference voltage; and Usr(n–1) is the most recent 10/12-cycle r.m.s. value. U(10/12)rms MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 12: Rapid Voltage Changes: Under-Deviation Assessment And Over-Deviation Assessment

    For 3-phase systems, this can be written (with Uij fund = phase i to phase j fundamental voltage): The zero-sequence u0 component is evaluated by the magnitude of the following ratio, expressed as a percentage: MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 13: Current Unbalance

    50 for the purpose of the compatibility levels in this standard NOTE: THD takes account of harmonics only. Mains Signaling Voltage: Performed per IEC 61000-3-8 IEC Flicker: Performed per IEC 61000-4-15 MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 14: Mpq1000 Specifications

    Harmonic Frequency Resolution 0.01Hz Frequency Accuracy 0.01Hz at 50Hz and 60Hz Transient Response 1µsec (+/-2697V) Sub-cycle events 64 μsec (Notching, Noise…etc) DEMAND Active Power Range 0 to 6MW without a ratio MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 15 10.8 VDC NiMH (Use only Megger Battery) Run Through Time 8 Hours Maximum without CT’s Charge Time 2 Hours MEMORY Memory Type SD Card Memory Size 32G Max USB Memory Stick Supported MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 16 EN50160 CE Standard EN50081-1 CE Standard EN50082-1 CSA Standard CAN/CSA-C22.2 No.1010.1-92 IEC Electromagnetic Compatibility IEC61326 IEC Ingress IEC60529 Vibration / Drop MIL-STD-810 G * Full Accuracy Specification guaranteed 0ºC to 50ºC MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 17: Safety

    These warnings and safety precautions are to be used where appropriate when following instructions in this manual. CAUTION! The equipment could be impaired from improper use. Read the complete manual before use. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 18 The equipment should not be used while its battery door is removed or if there is any visible damage to the case or if the hardware holding the unit together has been loosened. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 19: Mpq1000 Operation

    Phase AV Phase BV Phase CV Channel 4 Neutral Earth Phase AI Phase BI Phase CI Neutral Current Communication Ports (USB Stick, USB Port & Ethernet port) located on side of analyzer. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 20: Dc Power Jack

    DC Power Jack Located on the back of the analyzer. SD Card Located on the side of the analyzer Front Panel Keypad Operation MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 21: Menu Keys

    MPQ1000 Operation Menu Keys Menu Flow Charts MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 22 MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 23: Dmm Mode

    If the analyzer is programmed for either a 3 wire delta 2 wattmeter or 3 wire wye two wattmeter and channel 3 voltage is not enabled then the channel 3 voltage shall be calculated and displayed in the DMM screen and Record screen. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 24 This screen will display Real Power, Reactive Power, Apparent Power, Displacement Power Factor and True Power Factor. 3. The UNBALANCE screen. This screen will display the Negative Sequence Unbalance and The Zero Sequence Unbalance. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 25 This screen will display the Instantaneous Flicker and the 1 Minute Flicker Interval. Note: This screen must be left on for at least 1 minute in order to view the flicker 1 minute interval. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 26: Scope Mode

    By pressing the WAVEFORM key in the HOLD mode a scan line will open. This will allow you to view individual values throughout the waveform. NOTE: The bottom of the screen will display the key functions of the analyzer for each screen. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 27 3. The HARMONICS screen. This screen will display Harmonics and Inter-Harmonics through the 50 Order. Use the UP / DOWN keys to scroll through the different channels and to view the harmonic direction. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 28: Configuring The Mpq Unit

    If these settings are not made then the date and times in the recordings may be incorrect. Configure Date and Time format  1. From the HOME screen select SETUP then press the ENTER key. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 29 6. Use the UP / DOWN keys to scroll down to DAYLIGHT SAVINGS TIME.  Press the ENTER key to toggle between ON and OFF. Select desired mode. 7. When complete, press the BACK button to exit this screen and save the selections. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 30: Configure Unit Preferences

    Configure Unit Preferences  1. From the HOME screen select SETUP then press the ENTER key.  2. Select PREFERENCES then press the ENTER key. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 31 CT and automatically adjust the setup file to that range. If enabled then the MPQ will read the range of each CT and if it does not match the CT setting in the setup file it will notify you before changing any settings. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 32: Importing / Activating A Setup File

    1. From the DMM screen use the arrow keys to scroll over the SETUP, then press the  ENTER key. This will open a new series of screens.  2. Under the CHANNELS tab, use the arrow keys and ENTER key to enable and disable channels. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 33 The event limit percentage can be selected from this screen. This is the percentage of the declared voltage that the analyzer will use when setting its limits. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 34 When a setup file is altered it will need to be saved. 5. Using the right arrow key scroll over the SAVE tab.  6. Press the ENTER key. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 35: Uploading A Setup File From The Pc

    3. Plug the USB stick into the MPQ1000 type A USB Port.  4. Scroll down to USB on the Main Menu and press the ENTER key. This will open the USB Memory Screen. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 36 6. Use the UP / DOWN keys to scroll to the desired setup file and press the  ENTER key. This will import the setup file to the unit.  7. Press the ENTER key to close the IMPORT SETUP COMPLETE message. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 37: Uploading A Setup File From The Sd Card

    6. Scroll down to the desired Setup File and press the ENTER key. This will import the setup file to the unit.  7. Press the ENTER key to close the IMPORT SUCCESS message. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 38: Activating The Imported Setup File

    4. Scroll down to the setup file you wish to activate press the ENTER key. This will activate the setup file.  5. Press the ENTER key to close the activated message. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 39: Renaming A Data Or Setup File

    3. Using the UP / DOWN /◄ LEFT /► RIGHT keys navigate to the desired letter / number.  4. Press the ENTER key until the desired letter / number is displayed. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 40  To backspace, use the "<" symbol.  To enter a dot ".", dash "-", or underscore "_" , use the "1" key  No spaces are allowed in the file names. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 41: Installing The Mpq1000 Analyzer

    2. Ensure that the MPQ1000 PQ Analyzer is not exposed to water, excessive dust, and other hazardous conditions. The MPQ1000 PQ Analyzer is not meant for outdoor use. 3. Making electrical connections. Always complete all connections before beginning recording. Always stop recording before removing connections. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 42: Battery

    The MPQ1000 comes with an optional strap for hanging the analyzer. 2. Plug the AC adapter into the MPQ1000 unit using the DC input jack. Then plug the adapter into a standard AC outlet (110V-240VAC 50Hz/60Hz). MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 43: Voltage And Current Connections

    An arrow on the current clamp indicates the direction of the load. Phase AI Phase BI Phase CI Neutral Current MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 44: Wiring Diagrams For Demand Recording

    The third voltage and current can be connected to the Power Analyzer but will be recorded as RMS data only, providing you activate the channels. CAUTION Inspect all power cords and wires for proper insulation integrity before connecting to any power source. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 45   LOAD 2-WIRE SINGLE PHASE SINGLE WATTMETER ROTATION MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 46 WIRING DIAGRAMS for Demand Recording LOAD 3-WIRE SINGLE PHASE RESIDENTIAL METER ROTATION MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 47 LOAD 3-WIRE DELTA CONNECTION 2- WATTMETER METHOD MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 48 WIRING DIAGRAMS for Demand Recording LOAD 3-WIRE SPLIT PHASE 2- WATTMETER METHOD ROTATION MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 49 LOAD 3-WIRE NETWORK METER ROTATION ROTATION MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 50 WIRING DIAGRAMS for Demand Recording LOAD 3-WIRE OPEN DELTA 2-WATTMETER METHOD ROTATION ROTATION AC-BA-CB AC-CB-BA MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 51 LOAD 3-WIRE WYE CONNECTION 2-WATTMETER METHOD ROTATION ROTATION MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 52 WIRING DIAGRAMS for Demand Recording LOAD 4-WIRE RED-LEG OPEN DELTA 3-WATTMETER METHOD ROTATION ROTATION AC-BA-CB AC-CB-BA MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 53 LOAD 4-WIRE RED-LEG DELTA 3-WATTMETER METHOD ROTATION ROTATION AC-BA-CB AC-CB-BA MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 54 WIRING DIAGRAMS for Demand Recording LOAD 4-WIRE WYE CONNECTION 3-WATTMETER METHOD ROTATION ROTATION MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 55 LOAD 4-WIRE WYE CONNECTION 2½- WATTMETER METHOD ROTATION ROTATION MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 56: Floating Wye Neutral Measurement

    WIRING DIAGRAMS for Demand Recording Floating Wye Neutral Measurement LOAD FLOATING WYE CONNECTION 4-WIRE WYE CONNECTION 3-WATTMETER METHOD MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 57: Verify Active Setup File

    1. From the Main Menu scroll down to SETUP and press the ENTER key. 2. This will take you to the SETUP menu. Scroll down to SELECT and press the  ENTER key. The active Setup File will have an asterisk in front. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 58: Starting And Stopping A Recording

    Use the arrow keys to scroll over to the POWER selection. Verify the KW measurements are positive. If they are not then a current probe may be backwards. Verify the voltage and current phase angles are correct for the active setup file. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 59: Starting A Recording

    CT channel that is set incorrectly. The operator has the option to do the following:  Manually change the range on the CT to the correct range. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 60  To stop the recording, press the RECORD key again. If the display on the analyzer is off, pressing the RECORD key will first turn on the display.  Press the RECORD key a second time to stop the recording. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 61  A message will appear asking if you are sure. Press the ENTER key and the recording will now be stopped. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 62: Downloading Data From The Mpq1000

    2. Insert the USB stick into the type A USB port in the unit.  3. From the MAIN MENU scroll down to SD CARD and then press the ENTER key. This will display the SD CARD screen. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 63 The data transfer will now begin. 6. Once the data is transferred a success message will appear. NOTE: See MPQ-SWG-EN manual for transferring data from the USB stick or the SD card to the PC. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 64: Viewing Data On The Mpq Pq Analyzer

     Phase Angle Deviation  Mains Signaling Events  All charts and traces support a zoom function and a scan line. The following sections show how to view the recorded data on the unit. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 65: Viewing An Rms Chart

    Select VIEW DATA Select Data File Select type of RMS chart then View RMS press ENTER to create chart. See next page for RMS chart description. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 66 SIDE arrows to select different mode and use the scan line. charts. Select Phases: Use UP / DOWN arrows to select different phases 3. To EXIT chart, press the BACK◄ button. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 67: Viewing A Unbalance Chart

    2. Press the ENTER key to select an option. Select Data File Select VIEW DATA Select UNBALANCE then press ENTER View Unbalance Chart to create chart. See next page for unbalance chart description MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 68 SIDE arrows to select different DOWN arrows to select ENTER key to enter zoom charts. different phases mode and use the scan line. 3. To EXIT chart press the BACK◄ button. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 69: Viewing A Power Or Energy Chart

    Select VIEW DATA Select Data File Select POWER or ENERGY then press View POWER CHART ENTER to create chart. See next page for Power and Energy chart description. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 70 SIDE arrows to select different DOWN arrows to select ENTER key to enter zoom charts. different phases mode and use the scan line. 3. To EXIT chart press the BACK◄ button. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 71: Viewing A Thd Chart

    2. Press the ENTER key to select an option. Select VIEW DATA Select Data File Select THD then press ENTER to View THD CHART create chart. See next page for THD chart description. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 72 SIDE arrows to select different DOWN arrows to select ENTER key to enter zoom charts. different phases mode and use the scan line. 3. To EXIT chart press the BACK◄ button. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 73: Viewing A Frequency Chart

    2. Press the ENTER key to select an option. Select VIEW DATA Select Data File View FREQUENCY CHART Select Frequency then press ENTER to create chart. See next page for Frequency chart description MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 74 Zoom / Scan: Press the Select Function: Use SIDE to ENTER key to enter zoom SIDE arrows to select different mode and use the scan line. charts. 3. To EXIT chart press the BACK◄ button. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 75: Viewing A Harmonics / Inter-Harmonics Chart

    Select VIEW DATA Select Data File Select harmonic sequence then press Select Harmonics or Inter-Harm ENTER to create chart. (Inter-Harmonics). See next page for Harmonic chart description MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 76 3. To EXIT chart press the BACK◄ button. The following screen shall be displayed.  4. Scroll to RETURN and press the ENTER key. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 77: Viewing A Flicker Chart

    Select VIEW DATA Select Data File Select Short Term or Long Term then Select Flicker press ENTER to create chart. See next page for Flicker chart description. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 78 3. To EXIT chart press the BACK◄ button. The following screen shall be displayed.  4. Scroll to RETURN and press the ENTER key. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 79: Viewing An Event Chart

    Select VIEW DATA Select Data File Select type of event using the side to side Select Events arrows, then press ENTER to select See next page. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 80 Zoom / Scan: Press the ENTER key to enter zoom mode and use the scan line. 3. To EXIT chart press the BACK◄ button and scroll through the options. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 81: Unit Maintenance

    2. Disconnect the external power supply, if it is connected. 3. Remove the stand to gain full access to the battery compartment door. Stand Screws 4. Loosen the battery compartment door retaining screws and remove the battery compartment door. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 82 6. Grasp the wires between the battery and the connector and pull straight up until the connector unplugs from the MPQ1000. 7. Connect a new battery to the MPQ1000 by aligning the battery connector to the pins and pressing it in place. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...
  • Page 83 10% capacity. If desired, the unit can be left running and allowed to fully discharged and shut down. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 84: Help Screen

    This screen will display the firmware versions of the PQ Analyzer, hardware version, serial number, calibration date as well as the IP address of the analyzer if it is connected to a network. MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

  • Page 85: Spare Parts

    Spare Parts Part No. Description 2008-369 Battery Pack JA1009 Current Connector Dust Covers 2006-093 Wire Stand MPQ1000-UG-EN Rev 6 April 2020 1.800.561.8187 information@itm.com www. .com...

Table of Contents