Playing Cds; Playing A Cd - Sony CDP-CX450 Operating Instructions Manual

Playing CDs

Playing a CD

You can play all the tracks on a disc in the original
order (Continuous Play). You can also play up to 400
discs consecutively. Make sure you have inserted the
discs correctly as indicated on pages 10 and 11.
?/1
CONTINUE
I / 1
1
Turn on the amplifier and select the CD playing
position.
2
Press ?/1 to turn on the player.
3
Press CONTINUE to select ALL DISCS or 1 DISC
Continuous Play mode.
Each time you press CONTINUE, "ALL DISCS" or
"1 DISC" appears alternately in the display.
When you select The player plays
ALL DISCS All discs in the player consecutively
in the order of disc number. Empty
disc slots are skipped.
1 DISC Only the one disc you have selected.
4
Turn the JOG dial until the desired disc number or
Disc Name (see page 27) appears in the display to
select the first disc (ALL DISCS) or the disc you
want (1 DISC).
2nd NEXT DISC ART. HIT TRACK GROUP
ALL 1 DISC S SHUFFLE REPEAT 1 GROUP
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY CD1 CD2 CD3
5
Push the JOG dial to start playing and adjust the
volume on the amplifier.
The selected disc is set to the playing position, and
the player plays all the discs from the selected one
(ALL DISCS) or all the tracks once (1 DISC).
JOG
H
ART. MIN STEP SEC
Operations you way want to do during play
To Do this
Stop playback Press x.
Pause Press X.
Resume playing after Press X or H.
pause
Go to the next disc Z Press DISC SKIP + once.
Hold down the button to skip other
discs.
Go back to the Press DISC SKIP – once.
preceding disc Z Hold down the button to skip other
discs.
Go to a specific track Press the number button of the track
directly Z on the remote. When you directly
locate a track numbered over 10,
press >10 first, then the
corresponding number buttons.
Go to a point in a Press m (backward)/M
track while monitoring (forward) on the remote and hold
the sound Z down until you find the point.
Go to a point in a track Press m (backward)/M
by observing (forward) on the remote and hold
the display Z down until you find the point
during pause. You will not hear the
sound during the operation.
Go to the next track Turn the . AMS > dial
clockwise by one click.
Go back to the Turn the . AMS > dial
preceding track counterclockwise by one click.
Stop playing and Press OPEN/CLOSE.
remove the disc
z
When you turn off the player
The player remembers the last playing disc and the play
mode: Continuous (on page 13), Shuffle (on page 20), or
Program (on page 21). When you turn on the player
again, the player plays the same disc in the same play
mode.
Note
If " " appears in the large display, the disc has reached the
end while you were pressing M. Turn the . AMS >
dial counterclockwise or press m to go back.
Playing CDs
Playing CDs
13 GB