Download Print this page

WilTec AS196 Instruction Manual page 4

Airbrush diaphragm compressor
Hide thumbs Also See for AS196:

Advertisement

Never use the compressor in areas with vapours or humidity or near bodies of water.
Switch off the compressor if you do not use it. Disconnect from mains before you repair, recon-
dition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the cable
away from heat, oil, or sharp edges. Protect it from breaking. Do not pull out the plug by pulling
the power cable.
If the compressor is used outdoors, only approved extensions may be used. Every wire of the
extension cable must have at least a 1,5 mm² cross-section.
Store the compressor in a well-ventilated place. Do not allow children or any other people not
able to handle this device to play or work with it.
Be very careful when working with the compressor. Do not perform work with this product when
being unalert or influenced by alcohol, drugs, or medicine.
When beginning work, make sure that all screws are tightened.
Do not use the compressor if it is damaged. If the compressor makes unusual noises and strong
vibrations or if other unusual signs occur that indicate some damage, immediately turn off the
compressor. Do not modify the compressor in any way. Only have repairs made by qualified
persons and using original spare parts.
Properties
Oil-free piston compressor, no air pollution
Overheating protection
Very low noise level
Use
The AS196 airbrush compressor is for example suitable for operating in the following areas: arts and
crafts, hobbies, modelling, tattoos and body art, make-up and nail design, as a source of air in the field
of medicine, in food industry, chemical industry, laboratories, etc. Constant and sufficient power is
achieved via a diaphragm.
Technical specifications
Type
Power (W)
Rotation speed (rpm)
Flow rate (
)
min
Pressure range (㍴)
Weight (㎏)
Size (㎜)
Suitable nozzles (㎜)
Sound level (dB (A))
Length of cable (m)
Hose connection (㎜)
User notes
The compressor has a 13 mm (¼") outlet, which can be effortlessly changed to ⅛". The match-
ing adapter is not included in the delivery.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Diaphragm compressor
250 (⅓ hp)
1450–1700
135
0–3.5 (50 psi)
9
376×165×230
0.2–1.0
approx. 55
1.9
13 (¼")
Item 34224
Page 4
07
2021-1

Advertisement

loading

This manual is also suitable for:

34224