Canon PIXMA Pro9000 Series Quick Start Manual page 74

Troubleshooting
Problem Possible Cause
Printer Does Not There may be
Start or Printer problems with your
Stops During operating system
Print Jobs
Cannot Print to Incorrect page size
End of Job is selected
The size of the print
data is too large
70
Restart your computer. It may solve the problem.
Delete an undesired print job, if there is any. Use Canon IJ Status Monitor in
Windows or click the printer's icon in the Dock in Macintosh for the deletion.
1. Open the printer properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu"
on page 33.
2. Click the Maintenance tab and then View Printer Status.
3. Click Display Print Queue.
4. Select Cancel All Documents (or Purge Print Documents) in the Printer menu.
In Windows XP and Windows 2000
The print jobs may not be selected.
5. When the confirmation message is displayed, click Yes.
The print job is deleted.
1. Click the printer's icon in the Dock and display the list of print jobs in progress.
If you are using Mac OS X v.10.2.8, click on the printer icon in the Dock to start
up the Print Center and double-click on the name of your printer in the Printer
List to open a list of print jobs in progress.
2. Select an undesired document and click
The print job is deleted.
Ensure that the page size setting matches the size of the paper loaded in the
printer:
Check the Paper Size setting from within your application to ensure that it
matches the size of the paper loaded.
Check Paper Size on the Page Setup tab in the printer properties dialog box of
the printer driver (Windows) or the Page Setup dialog box of the printer driver
(Macintosh) to ensure that it matches the size of the paper loaded.
Check the size of the print data. For Windows XP and Windows 2000, if the size of
the data is too large, part of it may be lost. When the spool format is EMF, follow
the procedure below.
1. Open the printer properties dialog box.
2. On the Page Setup tab, click Print Options.
3. Select the Reduce spool data size check box, and click OK.
When Reduce spool data size is set, the print quality may be
degraded.
Try This
.