Sony TC-TX313 Operating Instructions Manual page 5

A
2
Connect to
using the audio connecting cords.
Insert the plugs into jacks of the
same colour.
The two audio connecting cords are the
same, so you can connect
either cord.
TC-TX313 rear panel
L
IN
R
TAPE
A
*
DHC-MD313 rear panel
: sound flow
* A A
The sound signals of the CD, MD and
TUNER flow through the DHC-
MD313 to the tape deck when you
record to tape.
** B B
The sound signal of the tape deck
flows to the DHC-MD313 when you
play a tape.
How to insert the plugs
Insert the plugs firmly into the jacks.
Not firmly inserted
Insert to here.
A
, and B to B
A
or B using
OUT
B
A
B
3
Set VOLTAGE SELECTOR to the
position of your local power line
voltage (Except for European
countries model).
110-120V
4
Connect the Mains lead to a mains
after you complete all the
**
connections.
If the plug on this tape deck does not fit
your mains, detach the supplied adapter
from the plug (Except for European
countries).
If there is no sound or the tape
does not record at first operation
Make sure the plugs are inserted into the
jacks firmly.
• If the plugs are not inserted into the A
jacks firmly, you may not be able to record
the sound of the CD, MD and TUNER onto
a tape.
• If the plugs are not inserted into the B
jacks firmly, you may not be able to listen
to the sound of the tape deck.
The plugs of the audio connecting cords may
be tight. Insert the plugs at the point shown
in "How to insert the plugs" in step 2.
VOLTAGE SELECTOR
220-240V
5