Advertisement
BrewEasy
Assembly, Operation, & Maintenance
Congratulations on your purchase and thank you for selecting the BrewEasy™ Compact
from Blichmann Engineering™. We are confident that it will provide you years of service
and many gallons of outstanding beer. This manual will familiarize you with the use,
assembly, and sanitation procedures for the product.
PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE
WARNING:
CAUTION:
IMPORTANT:
Brewing has inherent hazards and requires care, focus, and a mindset of safety and precaution. Hot liquids, steam, flame,
electricity, heavy lifting, slippery surfaces, cuts, and harsh chemicals to name a few.
•
Always thoroughly read and understand all product manuals before using the product.
•
Always keep children and pets safely away from the brewing area.
•
Always wear protective clothing, safety glasses/goggles, shoes, and burn/chemical resistant gloves.
•
Always use GFCI protected circuits for ALL electrical equipment.
•
Always keep flame away from flammable surfaces.
•
Always brew on hard surfaces such as concrete.
•
Always disconnect electrical equipment from power and propane tanks after each use.
•
Never lift hot and/or heavy liquids.
•
Never use drugs or alcohol while brewing.
•
Never leave the brewing area unattended.
BrewEasy™ Compact NPT V1
© Blichmann Engineering, LLC 2021
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
Compact NPT
™
IMPORTANT INFORMATION
FOR IMPORTANT SAFETY INFORMATION!
Sections labeled "Warning" can lead to serious injury or death if not followed. Please thoroughly read these sections
and understand them completely before use. If you do not understand them or have any questions, contact your
retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of the equipment. Please
read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering
(www.BlichmannEngineering.com) before use.
Sections labeled "Important" should specifically be followed to ensure satisfactory results with the product.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blichmann BrewEasy Compact NPT
Summary of Contents for Blichmann BrewEasy Compact NPT
- Page 1 Blichmann Engineering (www.BlichmannEngineering.com) before use. CAUTION: Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of the equipment. Please read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use. IMPORTANT: Sections labeled “Important”...
-
Page 2: What's In The Box
AB-500067-00 Stainless Immersion Chiller AB-500071-00 GTH Adapter - Brass BE-000722-00 Hose Clamps - Stainless BE-000730-01 3/8” Vinyl Hose 10ft Whirlpool Kit: aWhirlpool-G2 G2 Whirlpool Valve Assembly BrewEasy™ Compact NPT V1 © Blichmann Engineering, LLC 2021 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts... - Page 3 For gas BrewEasy™ Compact installations, place the kettle on the burner. Be sure to read the manual for the burner and follow any setup instructions it may have. IMPORTANT: If you are using the Blichmann HellFire™ Burner, it comes configured for LP operation. For use with natural gas, you will need to install a natural gas conversion kit.
-
Page 4: Temperature Sensor Assembly
Install the remaining retaining o-ring and retaining washer on the outside of the kettle. Then, screw the bulkhead into the stainless steel elbow of the flow meter. No thread tape is required. Kettle wall BrewEasy™ Compact NPT V1 © Blichmann Engineering, LLC 2021 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts... - Page 5 BoilCoil™ and connect the other end to the BrewCommander™. Male 240V Female 240V L6-30P L6-30R PUMP RECEPTACLE TEMPERATURE PUMP POWER SENSOR PORT SUPPLY BrewEasy™ Compact NPT V1 © Blichmann Engineering, LLC 2021 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
-
Page 6: Operation
Proceed with your typical boil process by adding hops and other boil ingredients as required. Chill and transfer to your sanitized fermentor after the boil is complete. BrewEasy™ Compact NPT V1 © Blichmann Engineering, LLC 2021 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts... -
Page 7: Cleaning Procedures
Soak the hoses in a PBW solution, rinse with hot tap water and soak in a non-chlorine sanitizer. BrewEasy™ Compact NPT V1 © Blichmann Engineering, LLC 2021 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts... - Page 8 A. Limited Warranty 1. Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required.
Need help?
Do you have a question about the BrewEasy Compact NPT and is the answer not in the manual?
Questions and answers