Table of Contents
Advertisement
Quick Links
Tower of Power
Assembly, Operation, & Maintenance
Congratulations on your purchase, and thank you for selecting the Tower of Power™ LTE
Stand from Blichmann Engineering™. We are confident that it will provide you years of
service and many gallons of outstanding beer. This manual will familiarize you with the
use, assembly, and the sanitation procedures for the product.
PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE
WARNING:
CAUTION:
IMPORTANT:
Tower LTE Owner's Manual V5
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
LTE
™
IMPORTANT INFORMATION
FOR IMPORTANT SAFETY INFORMATION!
Sections labeled "Warning" can lead to serious injury or death if not followed. Please thoroughly read these sections
and understand them completely before use. If you do not understand them or have any questions, contact your
retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of the equipment. Please
read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering
(www.BlichmannEngineering.com) before use.
Sections labeled "Important" should specifically be followed to ensure satisfactory results with the product.
© Blichmann Engineering, LLC 2019
1
Advertisement
Table of Contents
Related Manuals for Blichmann Tower of Power LTE
Summary of Contents for Blichmann Tower of Power LTE
- Page 1 Blichmann Engineering (www.BlichmannEngineering.com) before use. CAUTION: Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of the equipment. Please read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use. IMPORTANT: Sections labeled “Important”...
- Page 2 REQUIRED TOOLS: 7/16” Wrench x2 #2 Phillips Screwdriver 3/8” Wrench Adjustable Wrench PTFE Thread Seal Tape *RipTide™ Pump include with aTOP_Tower_LTE_P models only. Tower LTE Owner’s Manual V5 © Blichmann Engineering, LLC 2019 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
- Page 3 Be sure to install the pump with the pump head on Figure 3 the left-hand side of the Tower LTE assembly. Install the pump with the supplied ¼”-20 acorn nuts as shown in Figure 3. Tower LTE Owner’s Manual V5 © Blichmann Engineering, LLC 2019 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
- Page 4 The SparkBox™ is used for gas BrewCommander™ controllers. Use the directions below to mount your SparkBox™ to the Tower of Power LTE stand. Attach the bracket to the upper support (Figure 5) with the ¼”-20 x 1/2” bolts and ¼”-20 nuts as shown in Figure 6.
- Page 5 Figure 10. Step Two: Figure 11 Install the Therminator™ chiller to the Quick Release Bracket and hook onto the mounting plate as shown in Figure 11. Tower LTE Owner’s Manual V5 © Blichmann Engineering, LLC 2019 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
- Page 6 RipTide™ pump. Never restrict the Flow Control Valve inlet of the pump, this will result in poor performance and possible damage to your pump. (see Figure 14) Figure 14 Tower LTE Owner’s Manual V5 © Blichmann Engineering, LLC 2019 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
- Page 7 A. Limited Warranty 1. Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required.
Need help?
Do you have a question about the Tower of Power LTE and is the answer not in the manual?
Questions and answers