Advertisement
Available languages
Available languages
If WEP encryption is enabled, select the Data encryption (WEP enabled)
4
check box, deselect the The key is provided for me automatically
check box and enter the WEP key set for the Access Point in the Network
key field.
Click OK.
5
If you have forgotten your Access Point settings, refer to the procedure described
in Case 6.
Case 6 - I forgot my settings
You can reset the Access Point to its factory defaults as follows:
Check that the Access Point is on.
1
Use a paper clip or a similar object to hold down the Reset switch at
2
the bottom of the Wireless Unit for at least one second.
When you press the switch, the Status indicator on the front of the
Wireless Unit lights red. After one second, the indicator starts to flash.
Take care not to press the Quick Setup switch by mistake.
When the status indicator flashes red, release the Reset switch.
3
The Access Point restarts automatically and all its settings revert to
the factory defaults.
Case 7 - If Easy Setup is used after Advanced Setup, what
about items not included in Easy Setup?
If you reconfigure the unit with Easy Setup after using Advanced Setup, the
items not included in Easy Setup are set as follows:
ITEM
Frequency (channel)
Broadcast Network Name (SSID)
Access Control
Connection Method
DNS Server
Speed
Setup Switch
Time Server (NTP Server)
In the table, - indicates blank settings.
10
SETTING
Auto Select
Yes
Accept all
Obtain IP address automatically (DHCP)
-
Auto-Detect
Enable
-
Advertisement
