On Handling The Lcd Screen - Sony VGC-V2M Hardware Manual

❑
If the computer is brought directly from a cold location to a warm one, moisture may condense inside your computer. In this case,
allow at least one hour before turning on your computer. If any problems occur, unplug your computer and contact VAIO-Link.
❑
Make sure you disconnect the power cord before cleaning the computer.
❑
As you may lose important data once your computer is damaged, you should back up your data regularly. You can restore most
of the original application programmes from the supplied disc (read the Guide to Troubleshooting and Recovering your VAIO
System for details).

On handling the LCD screen

❑
Do not leave the LCD facing the sun as it can damage the LCD. Be careful when using the computer near a window.
❑
Do not scratch the LCD or exert pressure on it. This could cause malfunction.
❑
Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction. When
the computer returns to normal temperature, the screen returns to normal.
❑
A residual image may appear on the screen if the same image is displayed for a lengthy period of time. The residual image
disappears in a while. You can use a screensaver to prevent residual images.
❑
The screen becomes warm during operation. This is normal and does not indicate a malfunction.
❑
The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red,
blue, or green) that continuously appear on the LCD. This is a normal result of the manufacturing process and does not indicate
a malfunction.
❑
Avoid rubbing the LCD screen, as this can damage the screen. Use a soft, dry cloth to wipe the LCD screen.
n N
60
Precautions