Periodic Cleaning - PSC Power Star Smart Traveler Operation Manual

PERIODIC CLEANING:

Once a year it is recommended that you remove the Power Star Smart Traveler from your
equipment rack and blow all of the loose dust from all of the vent slots using compressed air.
This will help keep the unit cleaner and in turn will keep all of the interior electronic parts
operating at a lower temperature which will extend the life of the unit.
AC POWER:
The Power Star Smart Traveler will operate world-wide without adjustment as it has an AC input
range of 90 to 264 Vac at 47 to 63Hz. Simply plug it into a properly wired outlet and it will begin
to charge the batteries (if needed). An "AC" power indicating BLUE LED is located on both the
main unit and on the remote-control box for your convenience.
DC CONNECTIONS: There are eleven (11) XLR female DC output connectors located on the front
panel of the PSC Power Star Smart Traveler. The first nine (9) XLRs located to left hand side of
the unit are rated for up to 3 Amps of output current each. The remaining two (2) output
connectors are all rated for up to 5 Amps of output current each.
9 x XLR With 3 Amp Output
AC Receptacle.
2 x XLR With 5 Amp Output, SpeakOn
w/ 16 Amp Output