Sony PCV-W2/C Hardware Manual page 47

Connecting peripheral devices
n N
46
!
Connect only 10BASE-T/100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may cause a malfunction, excessive heat
or even fire in the port. If using this computer in Germany, please make sure you do not use an ISDN cable. It is physically very similar, but its higher
voltage of 12V may destroy the motherboard inside the computer.
✍
For more information about connecting your VAIO to the network, please consult the hardware troubleshooting section of the VAIO-Link website
(www.vaio-link.com):
For help on connecting to a network, see your network administrator if you have one.