Viewing The Amount Of Memory - Sony PCV-W1/D Hardware Manual

Upgrading your VAIO computer
10 Press evenly against the module's upper corners. The side latches snap into position, holding the memory
module in place.
11 Now replace the unit cover by aligning the tabs on the cover to the tracks on the system unit's chassis.
12 Gently slide the cover to the left, until the tabs lock the cover into place.
✍
There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.
!
Use only the memory modules specified on the printed Specifications sheet.
!
To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to relieve pressure. The
module is properly inserted when the side latches click into place.

Viewing the amount of memory

To view the amount of memory, proceed as follows:
1 Turn on the computer.
2 Click the Start button, point to All Programs, then VAIO System Information, and click VAIO
System Information again.
You can view the amount of installed memory here.
n N
51