Table of Contents
Advertisement
Getting help
4
Have a look through the different tabs and check for abnormalities.
5
Restart your computer.
The default setting for the printer port mode is correct for most printers, but you can try to change the
printer port mode, as follows:
1
Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
2
Use the keyboard's arrow keys to select the Advanced menu.
3
Select I/O Device Configuration, then press the <Enter> key.
4
Select Parallel Port Mode, then press the <Enter> key.
5
Select a printer port option using the arrow keys, then press <Enter>.
The documentation delivered with your printer should give you the relevant port option.
6
Press <F10> to exit, or use the arrow keys to select Save and Exit..
The message Save configuration changes and exit now? appears.
7
Make sure that Yes is selected and then press <Enter>.
8
Your computer restarts.
When I remove a Memory Stick™, an error message appears
Insert the Memory Stick™ into the slot again and press <Enter>. Wait until the active application finishes,
then remove the Memory Stick™. If the message confirms the ejection of the Memory Stick™, click OK.
n N
91
- Quick Links:
- Read this First
Hide quick links:
Advertisement
Chapters
Table of Contents
