Table of Contents
Advertisement
Upgrading your VAIO computer
7
Press evenly against the memory module's upper corners. The end latches snap into position
automatically, as shown (3):
8
Reinstall the power supply and any add-on cards or components you removed.
9
Reinstall the power supply by following these steps:
❑
Rotate the power supply to its original position and slide it into the chassis until the tab snaps into
position.
❑
Replace the screw that secures the power supply to the rear of the chassis.
10
Replace the side cover as described in Closing the side cover.
✍
There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.
!
Use only PC-2100 DDR SDRAM DIMM modules.
n N
81
Advertisement
Table of Contents
