Inserting A Pci Add-On Board - Sony PCV-RX201 User Manual

Upgrading your VAIO computer

Inserting a PCI add-on board

Your computer has open PCI expansion slots. These slots enable you to install add-on boards to expand the
functionality of your system.
Add-on board configuration can vary.
To insert an add-on board, proceed as follows:
1 Shut down your computer and turn off all peripheral devices, such as your printer.
2 Unplug your computer and any peripheral devices.
3 Remove the side cover as described in Opening the side cover
4 Locate one of the two available expansion slots.
5 Remove the screw, and then remove the slot cover, as shown (configuration may vary):
6 Install the add-on board by plugging it into the expansion slot and secure it with the screw from the
expansion slot, as shown (configuration may vary):
(page 71).
n N
73