Upgrading your VAIO computer
5
Locate the notch on the bottom edge of the memory module (1).
6
Align the memory module over the slot, making sure the module is facing in the correct direction (2).
7
Press evenly against the memory module's upper corners. The end latches snap into position
automatically, as shown (3):
8
Reinstall the power supply and any add-on cards or components you removed.
9
Reinstall the power supply by following these steps:
❑
Rotate the power supply to its original position and slide it into the chassis until the tab snaps into
position.
❑
Replace the screw that secures the power supply to the rear of the chassis.
10
Replace the side cover as described in Closing the side cover
(page
78).
n N
77