Mid-Continent Instruments 4300 Series Installation Manual And Operating Instructions page 3

ECO Rev. Date
N/ R 10/ 1/ 03
A 11/ 4/ 03
B 05/ 25/ 04
C 09/ 15/ 04
4307 D 03/ 28/ 05
4503 E 01/ 04/ 06
4834 F 04/ 30/ 07
4956 G 12/ 13/ 07
5214 H 05/ 26/ 09
5270 J 09/ 01/ 09
Rev J, September 1, 2009
Mid-Continent I nstruments, Wichita, KS
Revision Detail
Complete issue
Revise text for improved short battery test. Add text to Sec. 2.6.2.B
for P/ N 36029 battery charger.
Update display configurations Fig. 1.1, update connector pinout:
Lighting (No polarity), revise currents in table 1.3, add bezel dims
to panel cutouts, add DO-160D environmental test qualification in
Table 1.2.
Revise section 2.6. Update DO-160D statement in section 1.6 from
A2... to C1... for 35K altitude.
Add Special HI RF Considerations paragraph to section 2.5. Update
DO-160D statement in section 1.6 from ...[ RR] ... to ...[ WW] ...
Add section 2.6.1D.2 regarding automatic capacity test.
Delete -40X single voltage versions.
Update DO-160 qualification in section 1.6 from ...[ WW] to ...[ WF] ...
and from ...[ A3C3] ... to [ A3H33] . Remove paragraph pertaining to
Special HI RF Considerations in section 2.5.
Note: This change is incorporated only on units identified as Mod
Status 4 as indicated on the unit nameplate.
Change 4300-4XX to 4300-XXX with Battery Backup to include OEM
specific versions.
Remove first paragraph in section 3.6 stating that I ndicator is not
to be used as a reference for aerobatic flight. Update DO-160
qualification in section 1.6 from ...[ (SBM)(RBB1)] ... to
...[ (SBM)(RBB1)(P)] ...
Manual Number 9015762
Detail
Page 4 of 22