Precautions For Installation - Panasonic BT-WMA17G Installation Instructions Manual

Components
Before installation, check the components.
■
Wall mount adaptor A
(for LCD monitor) ........... (×1)
■
Fixing screws (for LCD monitor) ................ (×4)
■
Angle fixing screws .................................... (×2)
■
Screws for securing wall mount adaptor A/B
(for securing LCD monitor and wall) .......... (×2)
Tool for the installation: Use a torque driver or torque wrench with
torque of 2.1 N·m or more.

Precautions for installation

■ Before removing the stand of the LCD monitor, to avoid scratch or
damage to the LCD monitor and the floor, place the front part of
the LCD monitor on a clean cloth containing no dirt and foreign
objects.
■ To ensure correct LCD monitor performance and prevent
trouble, do not install at any of the following locations.
•
Near sprinklers or fire/smoke detectors
•
Near high-voltage wires or dynamic power supplies
■ When the LCD monitor is operating, make sure the ambient
temperature does not exceed 35 ºC (95 ºF).
Failure to do this may cause heat to build up inside the LCD
monitor, resulting in malfunction.
Panasonic does not accept any responsibility for accident or damage
during installation if procedure in this manual is not followed.
• The illustrations are image illustrations and they may be different from
the actual product and shape.
6
■
Wall mount adaptor B
(for wall) ......................... (×1)
(M4×12 mm)
×8