Inserting A Pc Card - Sony VGN-X505VP Hardware Manual

Hardware Guide

Inserting a PC Card

To insert a PC Card, proceed as follows:
1
Remove the dummy card from the slot.
2 Insert the PC Card (left: Wireless LAN PC Card / right: multicard adapter) into one of the PC Card slots with the front label facing
upwards.
3 Gently push the PC Card slot into the connector.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears in the system tray.
✍
Some devices may not function properly if you repeat returning to Normal mode from Standby mode or Hibernate mode.
The computer will return to its original state if you restart it.
If your computer has two PC Card slots, the PC Card slots can accommodate (at the same time) two Type I, two Type II or one Type III PC Card. These slots are compatible
with Card Bus ports.
If your computer has two PC Card slots, use the lower slot for PC Type III cards.
Some PC Cards may require you to disable idle devices when using the PC Card.
Make sure you use the most recent software driver provided by the PC Card manufacturer.
If an "!" mark appears on the Device Manager tab in the System Properties dialog box, remove the software driver and then reinstall it.
n N
34
Using your VAIO computer