Table of Contents
Advertisement
CHANGING BATTERIES
Turn the instrument over on its face (position is the same for both
transmitter and receiver) and remove access plate with coin or
large blade screwdriver.
Lift the battery pack out carefully. Turn the battery pack slightly
and unsnap the battery connector. Change all eight batteries.
Then reattach the connector to the pack. Slip the battery pack
back into its compartment and do battery test. Refasten the
access plate.
Both the transmitter and receiver will work from 30 to 40 hours on
a set of 8 standard quality AA batteries. Alkaline batteries will give
at least 30 to 40% greater life. In cold weather, alkaline batteries
are much livelier than standard carbon zinc batteries.
WARNING: Batteries can contain hazardous materials and must
be disposed according to the laws in your country.
CAUTION: Do not try to recharge the batteries that come with the
TW-6, or any other batteries, except Ni-Cad rechargeables.
22
1.800.561.8187
information@itm.com
www.
.com
Advertisement
Table of Contents
