Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the slot at an angle of about 20 degrees. Press the
memory module firmly, and pivot it downwards until it snaps into place. Ensure that the memory module is
firmly installed in the slot and does not move easily.
1050 Speaker assembly
For access, remove these FRUs in order:
• "Removing the nano-SIM card and the nano-SIM-card tray" on page 68
• "1020 Base cover assembly" on page 70
74
T14 Gen 2 and P14s Gen 2 Hardware Maintenance Manual