Connector And Cable Guide - Lenovo ThinkPad T14 Gen 2 Hardware Maintenance Manual

Connector and cable guide

This topic provides information to help Lenovo authorized service technicians identify connectors and cables
for replacement purpose. To view each FRU and the exploded illustration of the computer, see "Major FRUs
and CRUs" on page 50 and "LCD FRUs" on page 53.
Note: Depending on your computer model, some connectors or cables might not be available.
System board connectors and cables (for Intel models without RFID)
Table 10. System board connector and cable guide
Item Connector (location)
Camera/Hall sensor/LED
1
connector (internal)
Power button board connector
2
(internal)
Ethernet card connector * (internal)
3
Internal cable required
Camera/Hall sensor/LED cable
Power button board cable
Ethernet card cable*
Cable connection
Connect one end of the cable to
the camera/mic combo board, hall
sensor, and LED and the other end
to this connector.
The power button board comes
with the cable. Connect the cable
to this connector.
Connect one end of the Ethernet
card cable to the Ethernet card
board and the other end to this
connector.
.
Chapter 6 Locations
55