Lenovo ThinkPad T14 Gen 2 Hardware Maintenance Manual page 119

Note: For LCD panel with the factory color calibration feature, do the following to install new color profiles:
1. Connect your computer to the network and close the X-Rite Color Assistant program.
2. Go to C:\Program files (x86)\X-Rite Color Assistant and locate the
ProfileUpdaterForDisplayReplacement.exe file.
3. Double-click the EXE file. Follow the on-screen instructions to input the display serial number and click
Submit. You can find the display serial number and instructions on a sticker fixed to the front of the new
LCD part. When the new color profiles are installed successfully, a prompted window will be displayed.
Removal and installation steps of the LCD panel and the LCD elastic adhesive tapes (for computer
models with the PPS LCD cover assembly and E-privacy touch panel/UHD panel)
Removal steps of the LCD panel and the LCD elastic adhesive tapes
1. Grasp the end of five elastic adhesive tapes with tweezers. Pull out each tape slowly in the direction as
shown until five elastic adhesive tapes are all released from LCD unit
Note: Do not pull the tapes too fast, otherwise, the tapes might snap.
1 2
and .
.
Chapter 8 Removing or replacing a FRU
113